|Electrical power:||.seventy five-300KW|
|Protection Class:||IP54 IP55|
|Frame Materials:||Cast Iron/Aluminum|
|Terminal Box:||Best or Side|
|Certification:||CE 3C CZPT|
The lengthen shaft motor adopts the style technologyand is manufactured of heat-resistant insulating components. It can make certain the safe procedure of the motor in substantial-temperature enviroment CZPT growing older and burning. Its motor functionality is made according to the qualities of supporter and pumb load, which can conserve strength and undertake bolstered insulation to ensure reliable insulation and increase service daily life.
1.You should confirm whether or not the visual appeal of the motro is damaged just before ues? Is there any oil leakage?
2.Remember to confirm the voltage of the motor. Voltage regulator can be installed whne voltage is unstable.
3.Please validate whether the speciation of the motor acquired is consistent with the style specification.
four.You should make confident that the frame is fastened to stay away from loosening for the duration of operation.
five.If sprocket, pulley,coupling are used and other components must be installed according to pertinent regulation.
6.The lubricating grease has been put into the body of the decelerating motor, and the lubricating oil can not be changed for 12000 several hours.
seven.When the motor is managing, the rated recent shall not exceed the recent value indicated on the motor nameplate.
eight.You should pay focus to the surrounding temperature, humidity, pH and other issues.
9.If it is not installed or operated in the right way, it might result in serious harm to the motor.
10.For the duration of servicing or disassembly, it is needed to confirm that the external electricity offer is completely folded absent from the motor.
11.The safety protection system need to be mounted to ensure the safety of operation.
12.The motor demands grounding wire, make sure you refer to related electricity distribution.
13.You should affirm that all installation components and transmission equipment are fastened accurately beforestarting the deceleration motor.
14.If the motor is driven with frequency converter at low pace, it is required to install the auxiliary cooling enthusiast.
fifteen.You should inform the technological division of our manufacturing unit when the motor is installed vertically.