These worm gear screw jacks are very precision and reliability, it could meet all of the necessary safety, cost-efficiency, and sturdiness mandates of the application. High power bronze worm gear can be used, the payloads from 0.5T to 100T . A total of 11 sizes are available, each in a traveling nut version and a basic version.
Worm equipment drive screw jack
Translating(traveling screw) and rotating (traveling nut) configurations
Electrical Driven and Manual Operated both are available
Trapezoidal spindle (self-locking) and Ball Screw spindle (high efficiency) version
Design option: Standard, Anti-rotation, Anti-backlash or Safety nut
Standard and customized end Worm Gear Jack fittings, mounting options, and drive shaft
Worm Equipment Screw Jack systems are ruggedly designed and stated in standard versions with load handling capacities from 1/4 ton to 100 tons. They might be used separately or in multiple plans. There are no “standard” travel lengths and all Worm Gear Screw Jack systems are built to specification.
The jack housings are constructed with ductile iron and proportioned to support the rated capacity of the machine. MJ, 1/4 ton, and 1/2 ton models have aluminium housings.
Each Worm Gear Screw Jack incorporates an alloy metal worm which drives a higher strength bronze worm equipment (drive sleeve). The worm shaft is supported on antifriction tapered roller bearings with external seals provided to prevent lack of lubrication (sealed radial bearings on the MJ, 1/4 , 1/2, and 1 ton devices). The drive sleeve can be supported on antifriction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the lifting screw to translate or rotate, dependant on jack configuration.
The Inch and Metric Worm Gear Machine Screw Jacks incorporate an alloy or stainless worm which drives a higher strength bronze worm gear (drive sleeve). The worm shaft is supported on anti-friction tapered roller bearings with exterior seals provided to avoid lack of lubrication. The drive sleeve is usually supported on anti-friction tapered roller or ball thrust bearings. Rotation of the drive sleeve causes the thread lifting screw to translate or rotate, dependant on jack configuration.
The threads are precision formed, typically using Course 2-C (Centralizing) tolerances. Jack lift shaft business lead tolerance is approximately ±0.004″ per foot.