SNOW PLOW Power UNIT

General Description
Consisting of the pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is created to operate materials handling gear. The lowering motion is achived by the solenoid valve with all the decreasing speed managed by an adjustable needle valve. The left and correct functions are outfitted with a dual pilot operated examine valve and cross-over relief valves.
Remark: Please seek the advice of our sales engineer for the distinct pump displacement, motor energy or tank capability.
Unique Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all the hydraulic elements concerned ahead of set up of the electrical power unit.
3. Viscosity of the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities.N46 hydraulic oil is suggested.
four. This power unit need to be mounted horizontal.
five. Check the oil level while in the tank soon after the initial start off from the power unit.
6. Oil transforming is required after the preliminary one hundred operation hrs, afterwards when just about every 3000 hours.