Our direct supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the proper time at the right price.
Taper bushing are widely used together with sprockets, v-belt pulleys, timing pulleys, 
coupling and other mechanical parts with taper bore connections.
Taper bushing series are constructed with high quality engineered components with great tolerance. The feature is usually easy to use and needs no extra alteration. These bushings can suit almost all kinds of assemblies and sizes. They will be the best choice in design for mechanical connections.
No costly re-boring: complete range of both metric and imperial available.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete brief reach range offered, for qd bushing china compact light-weight assemblies & Clean, Compact Style.
Simple installation and removal.
Our direct supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the right time at the right price.
Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered materials with great tolerance. The feature is definitely easy to make use of and needs no extra alteration. These bushings can match almost all sorts of assemblies and sizes. They are the best choice in design for mechanical connections.
No costly re-boring: complete selection of both metric and imperial obtainable.
Standard range matches up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range offered, for compact light-weight assemblies & Clean, Compact Style.
Simple installation and removal.
The original sheave and pulley mounting program developed to facilitate installation and replacement of components.
The QD (Quick Detachable) design provides for both conventional (flange outboard) and invert (flange inboard) mounting configurations.
1. Be certain the tapered cone surfaces of the bushing and the inside of the driven item are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end 1st. Assemble key.
3. Position QD bushing on shaft. Tighten established screw over key “hands tight” with standard Allen wrench only. Usually do not use excessive force.
4. Slide large end of sheave or sprocket taper bore into position over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
NOTE: Install M thru S bushings in the hub so that the two extra holes in the hub can be found as far as possible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque table on back. Do not use extensions on wrench handles. There must be a gap between the encounter of the sheave or sprocket hub and the flange of the QD bushing to insure a reasonable cone hold and press fit.
CAUTION: THIS GAP MUST NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power transmitting applications. Flanged quick-disconnect bushings include a completely split style to greatly help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to help drive the bushing into the shaft, while a split taper has a flange and an integral on the bushing to greatly help provide more drive.
QD bushings (” and metric sizes) possess a flanged design and feature a 4° taper with standard or reverse mounting. They are stocked in well-known completed bore sizes and minimum plain bore for customized reboring.
Many people make reference to both types as a “taper lock” because they both use the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, uses a set screw to operate a vehicle the bushing in to the bore of the component becoming installed (sheave, sprocket, etc.). Be cautious when installing these screws. The holes with threads on the bushing are for removal only. Also remember that the appearance of a flange externally of the bushing doesn’t indicate it’s a QD design. Split Taper bushing also has a flange, and both aren’t interchangeable. The QD design has a split that continues through the flange. The Steel QD (Quick Disconnect) Type bushing offers versatile and easy installation while providing exceptional holding power. QD Bushings are used thought out the industry offering comfort and design versatility. They are precision machined of quality Steel and are installed by tightening a number of cap screws. This draws the bushing in to the taper bore of the merchandise which compresses the bore of the bushing. QD bushings are easily removed by using the cap screws as jack-screws. Dual drilled holes are furnished in QD Bushings permitting mounting of product in the conventional or invert positions. This allows cap screws to end up being installed through product hub or bushing flange whichever is most convenient. A significant benefit in installation, cap screws are often inserted from the exterior where they are often accessible. QD Bushings can be found from share with all well-known bores within the range of each size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are used on sprockets, sheaves, and pulleys where more clamping push is necessary over standard bored-to-size bushings. Quick-Disconnect Bushings are crucial for mounting v-belt drives, synchronous belt drives and roller chain drives.