Single and dual reduction planetary equipment drives to be utilized with electric, hydraulic, surroundings motors or mechanical power input from high velocity, low torque sources to provide decreased speeds at increased torques. The input aspect has standard SAE pads for motor mounting. Obtainable in the three result configurations demonstrated below. Many units could be furnished with an intrinsic parking brake.
Single reduction drives are hydraulic planetary drive limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input rate is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Systems provide 95% power tranny efficiency.

Wheel Drive
Input side has regular SAE pads and splined input. Output aspect has hub for mounting vehicle wheel. Free wheel can be done by using the springtime disconnect to disengage the drive shaft. The disengage feature is usually regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined insight. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is standard SAE pads with splined input. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 emerges with or without essential parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and high temperature treated ring gear to reduce backlash growth due to wear. The external bearing nut supplies the supreme in shaft retention and shaft power. Output can be a spindle shaft or different sizes of integral pinion gears.