one.A connecting website link of an O-ring Chain for basic application is pre-coated with grease with the pins. In advance of connection, confirm the grease over the surfaces of pins, and in case the level of grease is smaller, apply grease with bare hands. (If gloves are applied, the grease might be absorbed by the gloves.)
Instance: Once the connecting link (I) of an O-ring chain for common application is
shipped, O-rings are fitted in the roots on the pins. If your O-rings come loose resulting from vibration for the duration of transport, refit the O-rings in to the roots in the pins.
In this case, you should definitely return the grease collected on the roots on the pins to the central surfaces on the pins, additional at portion A than at portions B proven during the over illustration. (Portions A is worn on account of sliding using the bushings.)
2.The chain is often most conveniently connected to the teeth of a sprocket. Engage the backlinks at both ends on the chain with the sprocket teeth and match connecting pins. If your sprocket might be moved, the chain can also be linked on the loosened side.
three. Connecting procedure
1.Confirm that O-rings are attached for the roots of your pins.
2.If the amount of grease utilized about the connecting pins is small, coat the pins with grease at the central portions.
three.Insert the connecting pins to the bushings from the inner hyperlinks at both ends.
four.Verify the grease is utilized to your complete encounter of your O-ring, and fit the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and though pressing the connecting plate, set up the spring clip. Verify no matter whether the head (the end with no split) from the spring clip is turned within the feeding course with the chain. (See the following illustration.)
six.You’ll want to verify that the spring clip is securely fitted during the clip grooves of your connecting pins.
This completes jointing on the connecting hyperlink. Note that grease on the surfaces of connecting pins and O-rings may be eliminated during installation work. In this instance, re-grease applying the grease on the surface of your base chain or even the grease from the polyethylene bag in which the connecting website link was contained.