Very hot Marketing 90mm Body 90W,12V/24V DC Brush Gear Motor for Climber Machine
Solution Description:
Equipment Motor-Torque Desk Allowance Torque Device:Upside (N.m)/Belowside (kgf.cm)
•Gearhead and Intermediate gearhead are sold individually.
•Enter the reduction ratio into the blank() in the design name.
•The velocity is calculated by dividing the motor’s synchronous velocity by the reduction ratio. The real speed is two%~20% considerably less than the exhibited price, based on the measurement of the load.
•To minimize the velocity over and above the reduction ratio in the pursuing desk, connect an intermediate gearhead (reduction ratio: 10) among the reducer and motor. In that situation, the permissible torque is 20N.m.
|
Kind Motor/Gearhead |
Gear Ratio |
three |
three.six |
5 |
6 |
seven.five |
9 |
twelve.5 |
fifteen |
eighteen |
25 |
30 |
36 |
50 |
60 |
seventy five |
90 |
one hundred |
a hundred and twenty |
one hundred fifty |
180 |
|
Pace r/min |
933 |
111 |
560 |
466 |
373 |
311 |
224 |
186 |
155 |
112 |
93 |
seventy seven |
fifty six |
forty six |
37 |
31 |
28 |
23 |
eighteen |
15 |
|
|
Z5D90-24GU-28S |
5GU()RC/ 5GU()RT |
.sixty |
.seventy three |
one.01 |
1.21 |
one.68 |
2.01 |
two.80 |
three.36 |
4.03 |
5.59 |
6.71 |
seven.twenty five |
ten.one |
12.1 |
15.1 |
eighteen.1 |
20. |
twenty. |
twenty. |
20. |
|
six.twelve |
seven.forty five |
10.3 |
12.3 |
17.one |
twenty.5 |
28.6 |
34.3 |
41.1 |
fifty seven. |
sixty eight.4 |
seventy four. |
103 |
123 |
154 |
185 |
200 |
two hundred |
two hundred |
200 |
Proportions(Device:mm):
Business Information
FAQ
Q: What’re your main products?
A: We presently make Brushed Dc Motors, Brushed Dc Equipment Motors, Planetary Dc Equipment Motors, Brushless Dc Motors, Stepper motors, Ac Motors and Higher Precision Planetary Gear Box and so on. You can check the technical specs for above motors on our internet site and you can e mail us to advise necessary motors for every your specification way too.
Q: How to select a ideal motor?
A:If you have motor photos or drawings to show us, or you have detailed specs like voltage, speed, torque, motor dimension, operating manner of the motor, needed life time and sound degree and so on, remember to do not wait to let us know, then we can recommend appropriate motor per your ask for accordingly.
Q: Do you have a CZPT services for your normal motors?
A: Indeed, we can customise for every your request for the voltage, speed, torque and shaft dimensions/form. If you require additional wires/cables soldered on the terminal or want to incorporate connectors, or capacitors or EMC we can make it way too.
Q: Do you have an specific layout provider for motors?
A: Yes, we would like to layout motors independently for our customers, but it may possibly want some mildew establishing cost and layout cost.
Q: What’s your guide time?
A: CZPTly speaking, our typical regular merchandise will need fifteen-30days, a little bit for a longer time for CZPT merchandise. But we are very adaptable on the lead time, it will rely on the distinct orders.
Make sure you speak to us if you have in depth requests, thank you ()
