• Motor gearboxes are maintenance-free, compact power resources for driving vent, screen, home and flap ventilation systems in greenhouses.
• Single phase and three phase options for your own needs.
• Key feature of the drives are a self-braking worm equipment transmission and a built-in linear limit switch device.
shaft-installed gear motors are comprehensive electromechanical drives in which the speed of the installed electrical motor is reduced to the desired value using two to 4 reduction stages. The drives are powerful and durable and show a compact and lightweight design.
The compact design is manufactured possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also feature a 60 to 70 percent weight reduction compared to commercially available drive motors. That is attained through the consistent application of aluminium die casting technology, which ensures a high degree of rigidity for the apparatus and motor housing simultaneously.
Each drive is produced and tested specifically for every order and customer. A sophisticated modular system permits a great diversity of types and a maximum amount of customization to customer requirements.
Thanks to their integrated control units, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, described end positions are protected by two position limit switches. This uncomplicated remedy does not only simplify the cabling, but also makes it possible to configure the finish positions quickly and easily. The high shut-off precision of the limit switches guarantees safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It really is connected with a steel shaft to carefully turn the pinions for greenhouse ventilation. With the support of electrical panel, it can run and then stop after set quantity of turns. Then it can open up and close the home Greenhouse Gear Motor windows for greenhouse ventilation to right positions.
To maintain the delicate environment inside a greenhouse, weather control systems certainly are a necessity. Many mechanical systems can be applied in this respect; however glass vent drive systems tend to be the most famous. The drive system contains a central gearmotor linked to a 40:1 right angle reducer with dual output shafts. These OP shafts connect to long jack shafts that spread across the roof type of the greenhouse linking to multiple rack and pinion mechanisms that open and close large glass screen panes in the ceiling for temperature control.
With respect to the size of the application (length of the shafting, quantity and weight of the screen panes) we offers two gearmotor solutions from a modified edition of their 200 series parallel shaft range – 1/5 HP and 1/20 HP. The application form Is generally intermittent in use; nevertheless the motors are rated continuous since the glass pane home windows could potentially be under constant, subtle adjustment throughout the day.
Gear Motor, also known as Electric motor Gearboxes, is a particular type of electrical motor that’s designed to generate high torque while maintaining a minimal horsepower, or low velocity, motor output. Equipment motors can be found in many different applications, especially for the greenhouse, livestock and agricultural industry, our motors are available options to use roof vents, wall vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment mistakes and can be very easily eliminated without disturbing the whole shaft.
shaft-installed gear motors are comprehensive electromechanical drives in which the speed of the installed electrical motor is decreased to the required value using two to 4 reduction stages. The drives are high performance and durable and show a compact and lightweight design.