The EP Greenhouse gearbox is a compact and lightweight reduction gear driver with a limit switch system that’s ideal for assembly of a locally available electric electric motor. The gear motor can be used in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP geared motor is definitely rainproof and windproof. The gear driver has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise reducer for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is certainly locked when the decrease gear motor is not running. The completely sealed reduction gearbox has an growth chamber with a diaphragm to keep the gear oil at a low pressure under all circumstances, even at high temperatures. Thanks to the usage of an growth chamber, the reducer could be installed in any placement. There are no limitations, since there is no need for a bleed plug. The sealed reduction gear motor keeps the gear essential oil of the reducer in optimum condition for its entire operating lifetime. The geared motor is suitable for discontinuous use, operating class s3-30%, with a maximum activation time of 25 minutes.
The Gear box reduction gear motor comes with an FT85 motor assembly flange, on to which the right IEC standard motor can certainly be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed in an built-in chamber and is enclosed by an impact-resistant plastic-type cover. The limit change system is accessible and simple to adjust. The limit switch system’s maximum switching range 
is definitely 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
Can be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).