Bearing with a Deep Groove Ball Bearing china riveted stamped metal cage
Filled with a polyalkylene glycol/ graphite mix for lubrication
Running-in period required to distribute the lubricant within the bearing for applications that stand idle for a long period
Not for wet or perhaps humid environments
Single-row, pre-lubricated, regular accuracy.
Deep Groove Ball Bearings will be one of the most trusted rolling bearings. They are being used to support radial and axial loads in both guidelines.
With small friction and high-limit speed, Ball Bearings are cost-effective and need little maintenance.
Chromium Steel (GCr15) made with heat treating, provides substantial and uniform hardness, good wear resistance, and excessive contact fatigue performance.
Suitable for all types of commercial equipment, micro motor, little rotary electric motor, office equipment and so forth.
Cages – Variety of cage types to fit your application needs: steel, solid brass or polymer
TOP QUALITY Steel – Ultra clean metal designed to extend bearing life simply by up to 80%
Advanced Grease 
Technology – NSK lubricants designed to extend grease lifestyle and improve bearing performance
Very Finished Raceways – Specially honed to minimize noise and increase the grease distribution
Patented Seals – Give a barrier to contamination in hard environments.
Electrically insulated ball bearings available
Outer diameters up to 2500 mm
This type of ball bearing it often the most used because of its versatility. They will be well suited for high speeds and can handle an excellent radial load capability, all will very little maintenance required.
“Deep Groove” identifies the competition (the groove where in fact the balls relax). There is for this reason a larger space between your inner and outer rings, compared to the diameter of the ball. This leaves space for the rubber seals.
The purpose of a ball bearing is to determine the relative position of two parts (usually the shaft and the bearing housing) and also to ensure their free rotation while transmitting the strain between them. At great rotational speeds (for example in gyro ball bearings), this application can be extended to include free rotation without nearly have on in the bearings. To achieve this, the two parts of the bearing could be separated by a layer of adhesive liquid film called an elastic hydrodynamic lubricating film. pointed out that flexibility could be maintained not merely when the bearing bears the strain on the shaft, but as well when the bearing is preloaded in order that the positioning precision and steadiness of the shaft does not surpass 1 microin or 1 nanoin. Hydrodynamic lubricating film.
Deep groove ball bearings mainly consider radial load, but can also support radial and axial load. When the simply radial loads, the contact angle is zero.
When the deep groove ball bearings with a more substantial radial clearance, with angular get in touch with bearings can bear huge axial load, deep groove ball bearing friction coefficient is little, the speed limit is also high.
One row deep groove ball bearings happen to be manufactured as start type (unsealed), sealed and shielded, the most popular sizes of deep groove ball bearings will be also produced in sealed versions with shields or speak to seals on one or both sides, the bearings with shields or seals about both sides happen to be lubricated for life and are maintenance free. A sealed bearings seals has speak to on the bearings internal and external, a shielded bearings shield features speak to on the outer just, and Shielded bearings are primarily meant for applications where the inner band rotates. If the outer ring rotates, there exists a risk that the grease will leak from the bearing at excessive speeds.
Double-row Deep Groove Ball Bearing currently have deep uninterrupted raceways and excessive conformity between the balls and raceways.
They could carry axial loads acting in both directions furthermore to radial loads.Twice row deep groove ball bearings will be
very well suited for bearing arrangements where in fact the load carrying ability of an individual row bearing is inadequate. For the same
outside and bore diameters, twice row bearings are a little bit wider than one row bearings but have considerably higher load
carrying capacity than sole row bearings in the 62 and 63 series.
EPT deep groove ball bearings for extreme temperatures correspond in design to standard one row deep groove ball bearings of the same size. They haven’t any filling slots and can accommodate ordinary axial loads in addition to radial loads. The radial inner clearance is normally a multiple of C5 to avoid the bearings from seizing, even though they cool swiftly. All floors of the bearing and shields happen to be manganese phosphated to enhance adhesion of the lubricant to the steel and provide additional safety against corrosion.