Product Description
12v 24v Nema 8 Hybrid Stepper Motor Electric powered Stepping Motors with Planetary /Worm Gearbox + Encoder + Brake + Integrated Controller
Solution Description
| GenHangZhou Specification | |
| Item | Specs |
| Action Angle | 1.8° or .9° |
| Temperature Increase | 80ºCmax |
| Ambient Temperature | -20ºC~+50ºC |
| Insulation Resistance | a hundred MΩ Min. ,500VDC |
| Dielectric Strength | 500VAC for 1minute |
| Shaft Radial Play | .02Max. (450g-load) |
| Shaft Axial Enjoy | .08Max. (450g-load) |
| Max. radial force | 28N (20mm from the flange) |
| Max. axial force | 10N |
1. The magnetic steel is large quality,we generally use the SH level sort.
2. The rotor is be coated,reduce burrs,working effortlessly,much less sounds. We check the stepper motor elements phase by action.
3. Stator is be take a look at and rotor is be test prior to assemble.
4. Soon after we assemble the stepper motor, we will do 1 far more check for it, to make confident the high quality is good.
JKONGMOTOR stepping motor is a motor that converts electrical pulse alerts into corresponding angular displacements or linear displacements. This tiny stepper motor can be extensively utilised in various fields, this kind of as a 3D printer, phase lights, laser engraving, textile equipment, health-related gear, automation tools, and so forth.
one.8 Diploma Stepper Motor Parameters:
| Model No. | Stage Angle | Motor Duration | Existing | Resistance | Inductance | Holding Torque | # of Prospects | Detent Torque | Rotor Inertia | Mass |
| ( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm2 | Kg | |
| JK42HS25-0404 | 1.8 | 25 | .four | 24 | 36 | 1.eight | 4 | seventy five | 20 | .15 |
| JK42HS28-0504 | 1.8 | 28 | .5 | 20 | 21 | 1.5 | 4 | 85 | 24 | .22 |
| JK42HS34-1334 | 1.eight | 34 | one.33 | two.1 | 2.5 | two.2 | 4 | 120 | 34 | .22 |
| JK42HS34-0406 | one.eight | 34 | .4 | 24 | 15 | one.six | six | one hundred twenty | 34 | .22 |
| JK42HS34-0956 | one.eight | 34 | .ninety five | 4.two | 2.5 | one.6 | 6 | 120 | 34 | .22 |
| JK42HS40-0406 | one.eight | forty | .four | 30 | thirty | 2.6 | 6 | 150 | 54 | .28 |
| JK42HS40-1684 | 1.8 | forty | 1.68 | 1.sixty five | 3.two | three.6 | 4 | 150 | 54 | .28 |
| JK42HS40-1206 | 1.eight | 40 | 1.two | three | two.seven | 2.nine | six | 150 | fifty four | .28 |
| JK42HS48-0406 | 1.eight | 48 | .4 | thirty | 25 | three.one | 6 | 260 | sixty eight | .35 |
| JK42HS48-1684 | one.eight | 48 | one.68 | 1.sixty five | two.eight | 4.four | four | 260 | 68 | .35 |
| JK42HS48-1206 | 1.8 | forty eight | 1.two | 3.3 | two.8 | three.seventeen | six | 260 | 68 | .35 |
| JK42HS60-0406 | 1.eight | sixty | .four | 30 | 39 | six.five | six | 280 | 102 | .5 |
| JK42HS60-1704 | one.8 | 60 | 1.7 | three | six.2 | seven.3 | 4 | 280 | 102 | .five |
| JK42HS60-1206 | 1.eight | 60 | 1.2 | six | 7 | five.6 | six | 280 | 102 | .five |
.9 Diploma Stepper Motor Parameters:
| Model No. | Step Angle | Motor Duration | Current | Resistance | Inductance | Holding Torque | # of Sales opportunities | Detent Torque | Rotor Inertia | Motor |
| ( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm2 | Kg | |
| JK42HM34-1334 | .9 | 34 | 1.33 | 2.one | four.2 | 2.2 | four | 200 | 35 | .22 |
| JK42HM34- 0571 | .nine | 34 | .31 | 38.five | 33 | 1.fifty eight | six | two hundred | 35 | .22 |
| JK42HM34-0956 | .9 | 34 | .ninety five | 4.two | 4 | 1.58 | 6 | 200 | 35 | .22 |
| JK42HM40-1684 | .9 | forty | 1.68 | 1.65 | three.2 | 3.three | 4 | 220 | fifty four | .28 |
| JK42HM40-0406 | .9 | 40 | .four | 30 | thirty | two.fifty nine | six | 220 | 54 | .28 |
| JK42HM40-1206 | .nine | forty | one.2 | three.three | 3.4 | two.59 | 6 | 220 | 54 | .28 |
| JK42HM48-1684 | .9 | forty eight | 1.68 | 1.sixty five | four.1 | 4.4 | 4 | 250 | 68 | .35 |
| JK42HM48-1206 | .nine | forty eight | 1.two | three.3 | 4 | 3.17 | 6 | 250 | 68 | .35 |
| JK42HM48-0406 | .9 | forty eight | .4 | thirty | 38 | three.seventeen | 6 | 250 | sixty eight | .35 |
| JK42HM60-1684 | .9 | sixty | 1.sixty eight | one.65 | five | 5.5 | 4 | 270 | 106 | .55 |
Nema seventeen HSP Planetary Gearbox Stepper Motor Parameters:
| General Specification | |
| Housing Substance | Steel |
| Bearing at Output | Ball Bearings |
| Max.Radial Load(12mm from flange) | ≤80N |
| Max.Shaft Axial Load | ≤30N |
| Radial Perform of Shaft (close to to Flange) | ≤0.06mm |
| Axial Perform of Shaft | ≤0.3mm |
| Backlash at No-load | 1.5° |
| 42HSP Planetary Gearbox Parameters | |||||||||
| Reduction ratio | three.71 | 5.18 | 13.seventy six | 19.two | 26.eight | fifty one | 71 | 99.five | 139 |
| Amount of equipment trains | 1 | 2 | 3 | ||||||
| Size(L2): mm | 27.three | 35 | 42.7 | ||||||
| Max.rated torque: kg.cm | 20 | 30 | 40 | ||||||
| Limited time permissible torque: kg.cm | 40 | 60 | 80 | ||||||
| Excess weight: g | 350 | 450 | 550 | ||||||
Nema 17 HSG Planetary Gearbox Stepper Motor Parameters:
| General Specification | |
| Housing Materials | Steel |
| Bearing at Output | Ball Bearings |
| Max.Radial Load(12mm from flange) | ≤20N |
| Max.Shaft Axial Load | ≤15N |
| Radial Play of Shaft (around to Flange) | ≤0.06mm |
| Axial Enjoy of Shaft | ≤0.3mm |
| Backlash at No-load | one.5° |
| 42HSG Planetary Gearbox Parameters | ||||
| Reduction ratio | five | 10 | fifteen | 20 |
| Variety of equipment trains | 1 | 2 | ||
| (L2)Duration: (mm) | 28.five | |||
| Peak torque: (kg.cm) | 10 | |||
| Backlash at Noload: (°) | 4deg | 3deg | ||
Nema seventeen PLE Planetary Gearbox Stepper Motor Parameters:
| PLE42-L1 Electrical Specification: | |||||
| Specification | PLE42-L1 | ||||
| Design | PLE42-03 | PLE42-04 | PLE42-05 | PLE42-07 | PLE42-571 |
| Reduction Ratio | three:01 | 4:01 | five:01 | 7:01 | 10:01 |
| Output Torque | 8N.m | 9N.m | 9N.m | 5N.m | 5N.m |
| Are unsuccessful-stop Torque | 16N.m | 18N.m | 18N.m | 10N.m | 10N.m |
| Suitable Motor | Φ5-ten / Φ22-2 / F31-M3 | ||||
| Rated Input Speed | 3000min-1 | ||||
| Max Input Velocity | 6000min-1 | ||||
| Typical Lifespan | 20000h | ||||
| Backlash | ≤15arcmin | ||||
| Efficiency | 0.ninety six | ||||
| Sounds | ≤55dB | ||||
| Work Temperature | -10°~+90° | ||||
| Degree of Defense | IP54 | ||||
| Fat | 0.25kg | ||||
| PLE42-L2 Electrical Specification: | ||||||
| Specification | PLE42-L2 | |||||
| Model | PLE42-012 | PLE42-015 | PLE42-016 | PLE42-571 | PLE42-571 | PLE42-571 |
| Reduction Ratio | 12:01 | 15:01 | 16:01 | twenty:01 | twenty five:01:00 | 28:01:00 |
| Output Torque | 10N.m | 10N.m | 12N.m | 12N.m | 10N.m | 10N.m |
| Are unsuccessful-stop Torque | 20N.m | 20N.m | 24N.m | 24N.m | 20N.m | 20N.m |
| Product | PLE42-035 | PLE42-040 | PLE42-050 | PLE42-070 | PLE42-100 | / |
| Reduction Ratio | 35:01:00 | forty:01:00 | 50:01:00 | 70:01:00 | 100:01:00 | / |
| Output Torque | 10N.m | 10N.m | 10N.m | 10N.m | 10N.m | / |
| Are unsuccessful-stop Torque | 20N.m | 20N.m | 20N.m | 20N.m | 20N.m | / |
| Appropriate Motor | Φ5-10 / Φ22-2 / F31-M3 | |||||
| Rated Input Pace | 3000min-one | |||||
| Max Enter Velocity | 6000min-1 | |||||
| Regular Lifespan | 20000h | |||||
| Backlash | ≤20arcmin | |||||
| Performance | 94% | |||||
| Sounds | ≤55dB | |||||
| Function Temperature | -10°~+90° | |||||
| Degree of Defense | IP54 | |||||
| Fat | 0.35kg | |||||
Jkongmotor Other Hybrid Stepper Motor:
| Motor collection | Stage No. | Step angle | Motor size | Motor dimensions | Prospects No. | Holding torque |
| Nema 8 | 2 section | one.8 degree | thirty~42mm | 20x20mm | 4 | 180~300g.cm |
| Nema 11 | two phase | one.8 degree | 32~51mm | 28x28mm | four or six | 430~1200g.cm |
| Nema fourteen | two phase | .9 or 1.8 diploma | 27~42mm | 35x35mm | four | a thousand~2000g.cm |
| Nema sixteen | two stage | one.8 diploma | 20~44mm | 39x39mm | four or six | 650~2800g.cm |
| Nema 17 | 2 section | .9 or 1.8 degree | twenty five~60mm | 42x42mm | 4 or 6 | one.5~7.3kg.cm |
| Nema 23 | two stage | .9 or 1.8 diploma | 41~112mm | 57x57mm | four or 6 or 8 | .39~3.1N.m |
| 3 stage | 1.2 degree | 42~79mm | 57x57mm | – | .forty five~1.5N.m | |
| Nema 24 | two section | one.8 diploma | 56~111mm | 60x60mm | eight | 1.seventeen~4.5N.m |
| Nema 34 | 2 phase | one.8 diploma | sixty seven~155mm | 86x86mm | 4 or 8 | 3.4~twelve.2N.m |
| three section | one.2 degree | sixty five~150mm | 86x86mm | – | two~7N.m | |
| Nema 42 | 2 stage | 1.8 diploma | ninety nine~201mm | 110x110mm | 4 | 11.2~28N.m |
| three section | 1.2 degree | 134~285mm | 110x110mm | – | eight~25N.m | |
| Nema 52 | two section | one.8 degree | 173~285mm | 130x130mm | four | 13.3~22.5N.m |
| 3 period | one.2 diploma | 173~285mm | 130x130mm | – | 13.3~22.5N.m | |
| Above only for agent products, products of particular request can be created in accordance to the customer ask for. | ||||||
Stepping Motor Tailored
In depth Pictures
Brushless Dc Motor Package Stepper Motor with Encoder
Linear Stepper Motor 3 4 Axis Stepper Motor Kits Hollow Shaft Stepper Motor
Bldc Motor Brushed Dc Motor Hybrid Stepper Motor
Organization Profile
HangZhou CZPT Co., Ltd was a high engineering industry zone in HangZhou, china. Our items utilized in several sorts of machines, such as 3d printer CNC machine, health care tools, weaving printing equipments and so on.
JKONGMOTOR warmly welcome ‘OEM’ & ‘ODM’ cooperations and other firms to set up prolonged-term cooperation with us.
Company spirit of honest and very good track record, won the recognition and assist of the broad masses of customers, at the exact same time with the domestic and foreign suppliers close group of pursuits, the organization entered the stage of stage of benign improvement, laying a sound basis for the strategic goal of realizing only genuinely the sustainable growth of the company.
Equipments Demonstrate:
Creation Circulation:
Bundle:
Certification:
|
/ Piece | |
10 Pieces (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Printing Equipment |
|---|---|
| Speed: | High Speed |
| Number of Stator: | Two-Phase |
###
| Customization: |
|---|
###
| Genaral Specification | |
| Item | Specifications |
| Step Angle | 1.8° or 0.9° |
| Temperature Rise | 80ºCmax |
| Ambient Temperature | -20ºC~+50ºC |
| Insulation Resistance | 100 MΩ Min. ,500VDC |
| Dielectric Strength | 500VAC for 1minute |
| Shaft Radial Play | 0.02Max. (450g-load) |
| Shaft Axial Play | 0.08Max. (450g-load) |
| Max. radial force | 28N (20mm from the flange) |
| Max. axial force | 10N |
###
| Model No. | Step Angle | Motor Length | Current | Resistance | Inductance | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
| ( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm2 | Kg | |
| JK42HS25-0404 | 1.8 | 25 | 0.4 | 24 | 36 | 1.8 | 4 | 75 | 20 | 0.15 |
| JK42HS28-0504 | 1.8 | 28 | 0.5 | 20 | 21 | 1.5 | 4 | 85 | 24 | 0.22 |
| JK42HS34-1334 | 1.8 | 34 | 1.33 | 2.1 | 2.5 | 2.2 | 4 | 120 | 34 | 0.22 |
| JK42HS34-0406 | 1.8 | 34 | 0.4 | 24 | 15 | 1.6 | 6 | 120 | 34 | 0.22 |
| JK42HS34-0956 | 1.8 | 34 | 0.95 | 4.2 | 2.5 | 1.6 | 6 | 120 | 34 | 0.22 |
| JK42HS40-0406 | 1.8 | 40 | 0.4 | 30 | 30 | 2.6 | 6 | 150 | 54 | 0.28 |
| JK42HS40-1684 | 1.8 | 40 | 1.68 | 1.65 | 3.2 | 3.6 | 4 | 150 | 54 | 0.28 |
| JK42HS40-1206 | 1.8 | 40 | 1.2 | 3 | 2.7 | 2.9 | 6 | 150 | 54 | 0.28 |
| JK42HS48-0406 | 1.8 | 48 | 0.4 | 30 | 25 | 3.1 | 6 | 260 | 68 | 0.35 |
| JK42HS48-1684 | 1.8 | 48 | 1.68 | 1.65 | 2.8 | 4.4 | 4 | 260 | 68 | 0.35 |
| JK42HS48-1206 | 1.8 | 48 | 1.2 | 3.3 | 2.8 | 3.17 | 6 | 260 | 68 | 0.35 |
| JK42HS60-0406 | 1.8 | 60 | 0.4 | 30 | 39 | 6.5 | 6 | 280 | 102 | 0.5 |
| JK42HS60-1704 | 1.8 | 60 | 1.7 | 3 | 6.2 | 7.3 | 4 | 280 | 102 | 0.5 |
| JK42HS60-1206 | 1.8 | 60 | 1.2 | 6 | 7 | 5.6 | 6 | 280 | 102 | 0.5 |
###
| Model No. | Step Angle | Motor Length | Current | Resistance | Inductance | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Motor |
| ( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm2 | Kg | |
| JK42HM34-1334 | 0.9 | 34 | 1.33 | 2.1 | 4.2 | 2.2 | 4 | 200 | 35 | 0.22 |
| JK42HM34-0316 | 0.9 | 34 | 0.31 | 38.5 | 33 | 1.58 | 6 | 200 | 35 | 0.22 |
| JK42HM34-0956 | 0.9 | 34 | 0.95 | 4.2 | 4 | 1.58 | 6 | 200 | 35 | 0.22 |
| JK42HM40-1684 | 0.9 | 40 | 1.68 | 1.65 | 3.2 | 3.3 | 4 | 220 | 54 | 0.28 |
| JK42HM40-0406 | 0.9 | 40 | 0.4 | 30 | 30 | 2.59 | 6 | 220 | 54 | 0.28 |
| JK42HM40-1206 | 0.9 | 40 | 1.2 | 3.3 | 3.4 | 2.59 | 6 | 220 | 54 | 0.28 |
| JK42HM48-1684 | 0.9 | 48 | 1.68 | 1.65 | 4.1 | 4.4 | 4 | 250 | 68 | 0.35 |
| JK42HM48-1206 | 0.9 | 48 | 1.2 | 3.3 | 4 | 3.17 | 6 | 250 | 68 | 0.35 |
| JK42HM48-0406 | 0.9 | 48 | 0.4 | 30 | 38 | 3.17 | 6 | 250 | 68 | 0.35 |
| JK42HM60-1684 | 0.9 | 60 | 1.68 | 1.65 | 5 | 5.5 | 4 | 270 | 106 | 0.55 |
###
| General Specification | |
| Housing Material | Metal |
| Bearing at Output | Ball Bearings |
| Max.Radial Load(12mm from flange) | ≤80N |
| Max.Shaft Axial Load | ≤30N |
| Radial Play of Shaft (near to Flange) | ≤0.06mm |
| Axial Play of Shaft | ≤0.3mm |
| Backlash at No-load | 1.5° |
###
| 42HSP Planetary Gearbox Parameters | |||||||||
| Reduction ratio | 3.71 | 5.18 | 13.76 | 19.2 | 26.8 | 51 | 71 | 99.5 | 139 |
| Number of gear trains | 1 | 2 | 3 | ||||||
| Length(L2): mm | 27.3 | 35 | 42.7 | ||||||
| Max.rated torque: kg.cm | 20 | 30 | 40 | ||||||
| Short time permissible torque: kg.cm | 40 | 60 | 80 | ||||||
| Weight: g | 350 | 450 | 550 | ||||||
###
| General Specification | |
| Housing Material | Metal |
| Bearing at Output | Ball Bearings |
| Max.Radial Load(12mm from flange) | ≤20N |
| Max.Shaft Axial Load | ≤15N |
| Radial Play of Shaft (near to Flange) | ≤0.06mm |
| Axial Play of Shaft | ≤0.3mm |
| Backlash at No-load | 1.5° |
###
| 42HSG Planetary Gearbox Parameters | ||||
| Reduction ratio | 5 | 10 | 15 | 20 |
| Number of gear trains | 1 | 2 | ||
| (L2)Length: (mm) | 28.5 | |||
| Peak torque: (kg.cm) | 10 | |||
| Backlash at Noload: (°) | 4deg | 3deg | ||
###
| PLE42-L1 Electrical Specification: | |||||
| Specification | PLE42-L1 | ||||
| Model | PLE42-03 | PLE42-04 | PLE42-05 | PLE42-07 | PLE42-010 |
| Reduction Ratio | 3:01 | 4:01 | 5:01 | 7:01 | 10:01 |
| Output Torque | 8N.m | 9N.m | 9N.m | 5N.m | 5N.m |
| Fail-stop Torque | 16N.m | 18N.m | 18N.m | 10N.m | 10N.m |
| Suitable Motor | Φ5-10 / Φ22-2 / F31-M3 | ||||
| Rated Input Speed | 3000min-1 | ||||
| Max Input Speed | 6000min-1 | ||||
| Average Lifespan | 20000h | ||||
| Backlash | ≤15arcmin | ||||
| Efficiency | 0.96 | ||||
| Noise | ≤55dB | ||||
| Work Temperature | -10°~+90° | ||||
| Degree of Protection | IP54 | ||||
| Weight | 0.25kg | ||||
###
| PLE42-L2 Electrical Specification: | ||||||
| Specification | PLE42-L2 | |||||
| Model | PLE42-012 | PLE42-015 | PLE42-016 | PLE42-020 | PLE42-025 | PLE42-028 |
| Reduction Ratio | 12:01 | 15:01 | 16:01 | 20:01 | 25:01:00 | 28:01:00 |
| Output Torque | 10N.m | 10N.m | 12N.m | 12N.m | 10N.m | 10N.m |
| Fail-stop Torque | 20N.m | 20N.m | 24N.m | 24N.m | 20N.m | 20N.m |
| Model | PLE42-035 | PLE42-040 | PLE42-050 | PLE42-070 | PLE42-100 | / |
| Reduction Ratio | 35:01:00 | 40:01:00 | 50:01:00 | 70:01:00 | 100:01:00 | / |
| Output Torque | 10N.m | 10N.m | 10N.m | 10N.m | 10N.m | / |
| Fail-stop Torque | 20N.m | 20N.m | 20N.m | 20N.m | 20N.m | / |
| Suitable Motor | Φ5-10 / Φ22-2 / F31-M3 | |||||
| Rated Input Speed | 3000min-1 | |||||
| Max Input Speed | 6000min-1 | |||||
| Average Lifespan | 20000h | |||||
| Backlash | ≤20arcmin | |||||
| Efficiency | 94% | |||||
| Noise | ≤55dB | |||||
| Work Temperature | -10°~+90° | |||||
| Degree of Protection | IP54 | |||||
| Weight | 0.35kg | |||||
###
| Motor series | Phase No. | Step angle | Motor length | Motor size | Leads No. | Holding torque |
| Nema 8 | 2 phase | 1.8 degree | 30~42mm | 20x20mm | 4 | 180~300g.cm |
| Nema 11 | 2 phase | 1.8 degree | 32~51mm | 28x28mm | 4 or 6 | 430~1200g.cm |
| Nema 14 | 2 phase | 0.9 or 1.8 degree | 27~42mm | 35x35mm | 4 | 1000~2000g.cm |
| Nema 16 | 2 phase | 1.8 degree | 20~44mm | 39x39mm | 4 or 6 | 650~2800g.cm |
| Nema 17 | 2 phase | 0.9 or 1.8 degree | 25~60mm | 42x42mm | 4 or 6 | 1.5~7.3kg.cm |
| Nema 23 | 2 phase | 0.9 or 1.8 degree | 41~112mm | 57x57mm | 4 or 6 or 8 | 0.39~3.1N.m |
| 3 phase | 1.2 degree | 42~79mm | 57x57mm | – | 0.45~1.5N.m | |
| Nema 24 | 2 phase | 1.8 degree | 56~111mm | 60x60mm | 8 | 1.17~4.5N.m |
| Nema 34 | 2 phase | 1.8 degree | 67~155mm | 86x86mm | 4 or 8 | 3.4~12.2N.m |
| 3 phase | 1.2 degree | 65~150mm | 86x86mm | – | 2~7N.m | |
| Nema 42 | 2 phase | 1.8 degree | 99~201mm | 110x110mm | 4 | 11.2~28N.m |
| 3 phase | 1.2 degree | 134~285mm | 110x110mm | – | 8~25N.m | |
| Nema 52 | 2 phase | 1.8 degree | 173~285mm | 130x130mm | 4 | 13.3~22.5N.m |
| 3 phase | 1.2 degree | 173~285mm | 130x130mm | – | 13.3~22.5N.m | |
| Above only for representative products, products of special request can be made according to the customer request. | ||||||
|
/ Piece | |
10 Pieces (Min. Order) |
###
|
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
|---|
###
| Application: | Printing Equipment |
|---|---|
| Speed: | High Speed |
| Number of Stator: | Two-Phase |
###
| Customization: |
|---|
###
| Genaral Specification | |
| Item | Specifications |
| Step Angle | 1.8° or 0.9° |
| Temperature Rise | 80ºCmax |
| Ambient Temperature | -20ºC~+50ºC |
| Insulation Resistance | 100 MΩ Min. ,500VDC |
| Dielectric Strength | 500VAC for 1minute |
| Shaft Radial Play | 0.02Max. (450g-load) |
| Shaft Axial Play | 0.08Max. (450g-load) |
| Max. radial force | 28N (20mm from the flange) |
| Max. axial force | 10N |
###
| Model No. | Step Angle | Motor Length | Current | Resistance | Inductance | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
| ( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm2 | Kg | |
| JK42HS25-0404 | 1.8 | 25 | 0.4 | 24 | 36 | 1.8 | 4 | 75 | 20 | 0.15 |
| JK42HS28-0504 | 1.8 | 28 | 0.5 | 20 | 21 | 1.5 | 4 | 85 | 24 | 0.22 |
| JK42HS34-1334 | 1.8 | 34 | 1.33 | 2.1 | 2.5 | 2.2 | 4 | 120 | 34 | 0.22 |
| JK42HS34-0406 | 1.8 | 34 | 0.4 | 24 | 15 | 1.6 | 6 | 120 | 34 | 0.22 |
| JK42HS34-0956 | 1.8 | 34 | 0.95 | 4.2 | 2.5 | 1.6 | 6 | 120 | 34 | 0.22 |
| JK42HS40-0406 | 1.8 | 40 | 0.4 | 30 | 30 | 2.6 | 6 | 150 | 54 | 0.28 |
| JK42HS40-1684 | 1.8 | 40 | 1.68 | 1.65 | 3.2 | 3.6 | 4 | 150 | 54 | 0.28 |
| JK42HS40-1206 | 1.8 | 40 | 1.2 | 3 | 2.7 | 2.9 | 6 | 150 | 54 | 0.28 |
| JK42HS48-0406 | 1.8 | 48 | 0.4 | 30 | 25 | 3.1 | 6 | 260 | 68 | 0.35 |
| JK42HS48-1684 | 1.8 | 48 | 1.68 | 1.65 | 2.8 | 4.4 | 4 | 260 | 68 | 0.35 |
| JK42HS48-1206 | 1.8 | 48 | 1.2 | 3.3 | 2.8 | 3.17 | 6 | 260 | 68 | 0.35 |
| JK42HS60-0406 | 1.8 | 60 | 0.4 | 30 | 39 | 6.5 | 6 | 280 | 102 | 0.5 |
| JK42HS60-1704 | 1.8 | 60 | 1.7 | 3 | 6.2 | 7.3 | 4 | 280 | 102 | 0.5 |
| JK42HS60-1206 | 1.8 | 60 | 1.2 | 6 | 7 | 5.6 | 6 | 280 | 102 | 0.5 |
###
| Model No. | Step Angle | Motor Length | Current | Resistance | Inductance | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Motor |
| ( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm2 | Kg | |
| JK42HM34-1334 | 0.9 | 34 | 1.33 | 2.1 | 4.2 | 2.2 | 4 | 200 | 35 | 0.22 |
| JK42HM34-0316 | 0.9 | 34 | 0.31 | 38.5 | 33 | 1.58 | 6 | 200 | 35 | 0.22 |
| JK42HM34-0956 | 0.9 | 34 | 0.95 | 4.2 | 4 | 1.58 | 6 | 200 | 35 | 0.22 |
| JK42HM40-1684 | 0.9 | 40 | 1.68 | 1.65 | 3.2 | 3.3 | 4 | 220 | 54 | 0.28 |
| JK42HM40-0406 | 0.9 | 40 | 0.4 | 30 | 30 | 2.59 | 6 | 220 | 54 | 0.28 |
| JK42HM40-1206 | 0.9 | 40 | 1.2 | 3.3 | 3.4 | 2.59 | 6 | 220 | 54 | 0.28 |
| JK42HM48-1684 | 0.9 | 48 | 1.68 | 1.65 | 4.1 | 4.4 | 4 | 250 | 68 | 0.35 |
| JK42HM48-1206 | 0.9 | 48 | 1.2 | 3.3 | 4 | 3.17 | 6 | 250 | 68 | 0.35 |
| JK42HM48-0406 | 0.9 | 48 | 0.4 | 30 | 38 | 3.17 | 6 | 250 | 68 | 0.35 |
| JK42HM60-1684 | 0.9 | 60 | 1.68 | 1.65 | 5 | 5.5 | 4 | 270 | 106 | 0.55 |
###
| General Specification | |
| Housing Material | Metal |
| Bearing at Output | Ball Bearings |
| Max.Radial Load(12mm from flange) | ≤80N |
| Max.Shaft Axial Load | ≤30N |
| Radial Play of Shaft (near to Flange) | ≤0.06mm |
| Axial Play of Shaft | ≤0.3mm |
| Backlash at No-load | 1.5° |
###
| 42HSP Planetary Gearbox Parameters | |||||||||
| Reduction ratio | 3.71 | 5.18 | 13.76 | 19.2 | 26.8 | 51 | 71 | 99.5 | 139 |
| Number of gear trains | 1 | 2 | 3 | ||||||
| Length(L2): mm | 27.3 | 35 | 42.7 | ||||||
| Max.rated torque: kg.cm | 20 | 30 | 40 | ||||||
| Short time permissible torque: kg.cm | 40 | 60 | 80 | ||||||
| Weight: g | 350 | 450 | 550 | ||||||
###
| General Specification | |
| Housing Material | Metal |
| Bearing at Output | Ball Bearings |
| Max.Radial Load(12mm from flange) | ≤20N |
| Max.Shaft Axial Load | ≤15N |
| Radial Play of Shaft (near to Flange) | ≤0.06mm |
| Axial Play of Shaft | ≤0.3mm |
| Backlash at No-load | 1.5° |
###
| 42HSG Planetary Gearbox Parameters | ||||
| Reduction ratio | 5 | 10 | 15 | 20 |
| Number of gear trains | 1 | 2 | ||
| (L2)Length: (mm) | 28.5 | |||
| Peak torque: (kg.cm) | 10 | |||
| Backlash at Noload: (°) | 4deg | 3deg | ||
###
| PLE42-L1 Electrical Specification: | |||||
| Specification | PLE42-L1 | ||||
| Model | PLE42-03 | PLE42-04 | PLE42-05 | PLE42-07 | PLE42-010 |
| Reduction Ratio | 3:01 | 4:01 | 5:01 | 7:01 | 10:01 |
| Output Torque | 8N.m | 9N.m | 9N.m | 5N.m | 5N.m |
| Fail-stop Torque | 16N.m | 18N.m | 18N.m | 10N.m | 10N.m |
| Suitable Motor | Φ5-10 / Φ22-2 / F31-M3 | ||||
| Rated Input Speed | 3000min-1 | ||||
| Max Input Speed | 6000min-1 | ||||
| Average Lifespan | 20000h | ||||
| Backlash | ≤15arcmin | ||||
| Efficiency | 0.96 | ||||
| Noise | ≤55dB | ||||
| Work Temperature | -10°~+90° | ||||
| Degree of Protection | IP54 | ||||
| Weight | 0.25kg | ||||
###
| PLE42-L2 Electrical Specification: | ||||||
| Specification | PLE42-L2 | |||||
| Model | PLE42-012 | PLE42-015 | PLE42-016 | PLE42-020 | PLE42-025 | PLE42-028 |
| Reduction Ratio | 12:01 | 15:01 | 16:01 | 20:01 | 25:01:00 | 28:01:00 |
| Output Torque | 10N.m | 10N.m | 12N.m | 12N.m | 10N.m | 10N.m |
| Fail-stop Torque | 20N.m | 20N.m | 24N.m | 24N.m | 20N.m | 20N.m |
| Model | PLE42-035 | PLE42-040 | PLE42-050 | PLE42-070 | PLE42-100 | / |
| Reduction Ratio | 35:01:00 | 40:01:00 | 50:01:00 | 70:01:00 | 100:01:00 | / |
| Output Torque | 10N.m | 10N.m | 10N.m | 10N.m | 10N.m | / |
| Fail-stop Torque | 20N.m | 20N.m | 20N.m | 20N.m | 20N.m | / |
| Suitable Motor | Φ5-10 / Φ22-2 / F31-M3 | |||||
| Rated Input Speed | 3000min-1 | |||||
| Max Input Speed | 6000min-1 | |||||
| Average Lifespan | 20000h | |||||
| Backlash | ≤20arcmin | |||||
| Efficiency | 94% | |||||
| Noise | ≤55dB | |||||
| Work Temperature | -10°~+90° | |||||
| Degree of Protection | IP54 | |||||
| Weight | 0.35kg | |||||
###
| Motor series | Phase No. | Step angle | Motor length | Motor size | Leads No. | Holding torque |
| Nema 8 | 2 phase | 1.8 degree | 30~42mm | 20x20mm | 4 | 180~300g.cm |
| Nema 11 | 2 phase | 1.8 degree | 32~51mm | 28x28mm | 4 or 6 | 430~1200g.cm |
| Nema 14 | 2 phase | 0.9 or 1.8 degree | 27~42mm | 35x35mm | 4 | 1000~2000g.cm |
| Nema 16 | 2 phase | 1.8 degree | 20~44mm | 39x39mm | 4 or 6 | 650~2800g.cm |
| Nema 17 | 2 phase | 0.9 or 1.8 degree | 25~60mm | 42x42mm | 4 or 6 | 1.5~7.3kg.cm |
| Nema 23 | 2 phase | 0.9 or 1.8 degree | 41~112mm | 57x57mm | 4 or 6 or 8 | 0.39~3.1N.m |
| 3 phase | 1.2 degree | 42~79mm | 57x57mm | – | 0.45~1.5N.m | |
| Nema 24 | 2 phase | 1.8 degree | 56~111mm | 60x60mm | 8 | 1.17~4.5N.m |
| Nema 34 | 2 phase | 1.8 degree | 67~155mm | 86x86mm | 4 or 8 | 3.4~12.2N.m |
| 3 phase | 1.2 degree | 65~150mm | 86x86mm | – | 2~7N.m | |
| Nema 42 | 2 phase | 1.8 degree | 99~201mm | 110x110mm | 4 | 11.2~28N.m |
| 3 phase | 1.2 degree | 134~285mm | 110x110mm | – | 8~25N.m | |
| Nema 52 | 2 phase | 1.8 degree | 173~285mm | 130x130mm | 4 | 13.3~22.5N.m |
| 3 phase | 1.2 degree | 173~285mm | 130x130mm | – | 13.3~22.5N.m | |
| Above only for representative products, products of special request can be made according to the customer request. | ||||||
The Basics of a Gear Motor
The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Induction worm gear motor
If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Parallel shaft helical gear motor
The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Helical gear unit
This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.
editor by czh 2023-03-24