ep

January 19, 2021

Materials Dealing with Power UNIT 1
Standard Description
This energy unit is made for your fork lift field, consisting of hugely productive gear pump, DC motor, guide increase and decrease valve, tank, ect. The up and down motion are controlled from the lever with the guide release valve, and that is equipped with an electrical switch to activate the motor. The lowing pace is controlled by the strain compensated movement control valve.
Unique Notes
1. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
two. Clean every one of the hydraulic parts concerned just before set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and absolutely free of impurities, N46 hydraulic oil is advisable .
four. Oil modifying is needed soon after the initial 100 operation hrs, afterwards when just about every 3000 hrs.
five. The electrical power unit shown is intended to be mounted horizontally.

Material Handling Power UNIT 2
Basic Description
This electrical power unit capabilities energy up gravity down circuit. Activate the start solenoid to start the motor to lift the machine. The lowing motion is activated by the solenoid valve with the reducing pace controlled by the pressure compensated movement manage valve. Merchandise of this series is often widely utilized in the business of logistic products such as fork lift, mini lift table, and so on.
Special Notes
1. The duty of this power unit is S3,i.e.,thirty seconds on and 270 senconds off.
2. Clean the many hydraulic parts concerned in advance of mounting the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst,which should also be clean and free of charge of impurities, N46 hydraulic oil is encouraged .
four. Oil shifting is required after the first a hundred operation hours,afterwards after just about every 3000 hours.
five. The energy unit must be mounted horizontally.